During the whole process of the dry mortar plant, wear and tear often occurs, and the serious wear and tear of the equipment will reduce the service life, so how to reduce the wear and tear of the dry mortar equipment?

1. If there are objects in the equipment that cannot be crushed during the work of the dry mortar equipment, in order to better reduce the loss of the equipment, the rear thrust plate should be selected as the parts of the dry mortar equipment. Furthermore, there is a situation in which the wear and tear of the dry powder mortar equipment is reduced.
2. In the long-term work of the dry mortar equipment, it is very likely that the hopper of the mixer will be unbalanced, and the jaw plate of the equipment will be worn. If it is serious, it will affect the regular work output of the dry mortar equipment.
3. In the use of the dry mortar mixer, pay attention to whether the raw materials are mixed with hard debris, such as nails, gravel and other debris. If it is not cleaned in time, it will lead to product quality problems in the production of the equipment., thereby reducing the compressive strength to affect the mixing rate of raw materials and product particle size distribution.
4. Due to the compressive strength, the bearing force of the jaw plate of the mixer will be uneven, resulting in uneven wear of the jaw plate, which will seriously affect the regular work of the mixer. In order to ensure the working efficiency of the dry powder mortar mixer, the equipment parts should be changed. Therefore, the balance of compressive strength of raw materials should be ensured during mixing.
5. When foreign objects enter the equipment, in order to protect the equipment from damage, the rear thrust plate should be used as a safe part of the dry mortar mixer. The mixing force is transmitted to the thrust plate to cause the thrust plate to break or the screws of the combined thrust plate to be cut. Have a stable effect.
Causes of excessive vibration of dry mortar equipment:
It may be because the rigidity of the equipment barrel does not meet the standard. If so, the barrel needs to be replaced. If the vibration has not been reduced after the replacement, it is recommended to use a shock absorber to reduce the vibration.




